Passive Ethernet Extender over Coax

NE-SE01-020Q

Passive Ethernet Extender over Coax

The ENFORCER Passive Ethernet Extender over Coax is designed to extend the range of any TCP/IP device beyond the 300ft (100m) limit of Ethernet. The unit does not filter out any protocols, codes, or applications, compatibility with any IP camera and its software.

  • product_icon
  • product_icon
  • 1 Channel Ethernet over coax
  • 10/100 Mbps Full duplex*
  • Transmission distance:**
    • Up to 650ft (200m)@10Mbps
    • Up to 325ft (100m)@100Mbps
  • Passive, no power required
  • Built-in surge protection
  • Fast and easy to install
  • Bidirectional – can operate as transmitter and receiver
  • Sold as a set

* Use only with 10/100 Switches
** Actual transmission range will vary depending on equipment used and cable grade

Range10Mbps Up to 650′ (200m), 100Mbps Up to 325′ (100m)
Input ConnectorRJ45
Output ConnectorBNC
StandardIEEE802.3 10Base-T/100Base-T
Link CableRG59/U or better
Ethernet Speed10/100 Mbps
Operating Temperature-4º~131º F (-20º~55º C)
Dimensions2-3/8” x 1-1/8” x 13/16” (60 x 29 x 20 mm)
Product Information Sheet (pdf, 370KB)
Download
Manual (pdf, 367KB)
Download
IP Device does not function
correctly.
  • Make sure you are using the unit with 10/100 switches.
  • Make sure the Passive Ethernet Extender is connected
    on both sides.
  • Make sure the IP source and DVR or PC are powered.
  • Test the coaxial cable between the units and make sure
    it is functional.
  • Make sure that there are no problems with the IP
    device, cables, or DVR by plugging the IP device
    directly into the DVR or PC using the Cat5e/6 cables.
  • Make sure that the cables do not exceed the maximum
    distance (see pages 2 and 3 for more details).

 

 

Scroll to Top