- Extends power and data an additional 394ft (120m)
- Compliant with standard PoE IEEE 802.3af
- Installs on Cat5e/6 4-pair UTP cable with RJ45 jacks
- Supports 10/100/1000 BASE-T transmission rates
- Passive operation – no external power required
- Easy plug-and-play installation
- Auto-sensing for detecting PoE or non-PoE devices
- Built-in LED status indicators
- Sealed and fanless for increased reliability
- Compact, wall-mountable for convenience
| Ethernet Connection | RJ45 |
| Transmission Range – Single Repeater | Up to 787ft (240m) |
| Transmission Range – Two Repeaters | Up to 1,181ft (360m) |
| Max Device Power Range with PoE switch | 1st PoE Repeater- 8.58W at 787ft (240m), 2nd PoE Repeater- 4.21W at 1,181ft (360m) |
| PoE Standard | IEEE 802.3af Standard, 48V, 12.95W |
| Data Link | Pin 1/2，3/6，4/5，7/8 |
| Power Link | Pin 1/2 (+)，3/6 (-) End-Span |
| Current Draw | 1.1W (23mA)@Standby, 1.44W (30mA)@10Mbps, 1.92W (40mA)@100/1000 Mbps |
| Material | Aluminum |
| Operating Temperature | 32°~131° F (0°~55° C) |
| Dimensions | 2-5/8” x 4-5/16” x 1-1/16” (67 x 110 x 27 mm) |
| Weight | 6.4 oz. (180g) |
| IP device doesn’t function correctly | • Ensure that the IP camera/PoE device is functioning by plugging it directly into the PoE switch, computer, etc. • Double-check that the cables were connected properly. • Run a continuity test on all wires in the cable • Equipment at both ends must be at same link speed, 10BASE-T with 10BASE-T, 100BASE-T with 100BASE-T • Replace with a higher-grade cable for better performance. • Ensure that the cable lengths are within the allowable range and consistent with the remote PoE device power consumption and reduce cable length as needed • With 1000BASE-T, power consumption is greater, so no more than 2 POE repeaters may be used (Power consumption of POE equipment must under 7W |