6" Round IR Wave-to-Open Sensor with Manual Override
6" Round IR Wave-to-Open Sensor with Manual Override - Image 2

SD-9563-KSVQ

6″ Round IR Wave-to-Open Sensor with Manual Override

The ENFORCER 6″ Round IR Wave-to-Open Sensor with Manual Override is a full-featured exit plate using IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • product_icon
  • product_icon
  • Adjustable sensor range up to 7″ (18cm)
  • 1.2A relay, adjustable trigger duration 0.5~30 seconds or toggle
  • LED illuminated sensor for easy identification
  • Selectable LED color turns from red to green (or green to red) when the sensor is activated
  • 6″ Round stainless steel plate for mounting to a single-gang back box
  • IP65 Weatherproof for outdoor use
  • Power must be provided by low-voltage power-limited/Class 2 power supply
  • Use only low-voltage field wiring and do not exceed 98.5 ft (30m)
Operating temperature12~24 VDC
Current draw (max. ±10%)Standby red (12/24 VDC): 18mA / 23mA
Triggered green (12/24 VDC): 23mA / 29mA
Standby green (12/24 VDC): 14mA / 18mA
Triggered red (12/24 VDC):  28mA / 35mA
Relay typeSPDT dry contact, 1.2A@24VDC
Response time10ms
LEDStandby: Red*
Triggered: Green*
Ouput duration0.8~30 s, toggle
Range2″~7″ (5~18 cm)
Destructive attack levelLevel I
Line securityLevel I
Endurance levelLevel IV
Standby powerLevel I
IP RatingWeatherproof, IP65
Operating Temperature-4°~131° F (-20°~55° C)
Dimensionsø6″  (152 mm)
Weight7.3-oz (208g)

*Color function reversible †When properly installed

Product Information Sheet (PI) (pdf, 363KB)
Download
Manual (pdf, 263KB)
Download
Scroll to Top