- Rugged construction – heavy-duty stainless steel faceplate with coated steel housing
- Built-in proximity reader
- Wiegand output: 26, 34, 37 bits
- 12~24 VDC/VAC Auto-adjusting operation
- Up to 1,000 possible user codes/cards for output 1 and 100 each for outputs 2 and 3
- Up to 50 possible visitor codes, for one-time or limited-time use (1~99 hours)
- Up to 50 duress codes for output 1 and 10 each for outputs 2 and 3
- Output 1: Form C relay, 5A@24VDC max. / output 2 and 3: Form C relay, 1A@24VDC max.
- Outputs 1, 2 and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
- Tamper output, 50mA@24VDC max.
- All features are programmed directly from the keypad, no need for an external programmer
- EEPROM Memory protects programmed information in case of power loss
- Egress input lets users exit the premises without keying in the code
- Door sensor input for anti-tailgating operation
- Interlocking input for connecting to a second keypad
- Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
- Vandal-resistant, suitable for wall, post, or gooseneck mounting
- IP66 Weatherproof
| Operating Voltage | 12~24 VAC/VDC |
| Current Draw (@12VDC) | Standby: 80mA Keypress: 114mA Output 1 active: 150mA Outputs 1 & 2 active: 180mA Outputs 1,2, & 3 active: 220mA Wiegand data output: 150mA |
| Outputs | #1 Form C: 5A@24VDC #2 Form C: 1A@24VDC #3 Form C: 1A@24VDC K or A: 100mA@24VDC Durass: 100mA@24VDC Interlock: 100mA@24VDC Tamper: 50mA@24VDC Wiegand: 26~37bits |
| Inputs | Egress: N.O. Ground Door sensor: N.C. Ground Door inhibit: N.O. Ground |
| Proximity reader frequency | 125kHz (EM125) |
| Proximity reader sensing distance | 1-1/2″ (38mm) |
| IP Rating | Weatherproof IP66 |
| Operating humidity | 5~95%, non-condensing |
| Operating Temperature | -4º~158º F (-20º~70º C) |
| Material | Faceplate:1/16″ (1.5mm) Stainless steel Housing: 5/64″ (2mm) Anodized steel, powder paint |
| Dimensions | 5-1/4″x7-1/16″x3-3/8″ (133x180x85 mm) |
| Weight | 3-lb 12-oz (1.7kg) |
| User code doesn’t work |
|
| Master programming code doesn’t work |
|
| Keypad constantly beeps on power-up |
|
