SK-910RBQ

1-Channel RF Receiver, 11~24 VAC/VDC, 315MHz, Relay Output

The SK-910RBQ series of wireless receivers meet the growing demand for receivers with multiple, independently-controlled output functions. These RF receivers are compatible with both code hopping and fixed code transmitters. The receivers can be used to remotely control a variety of home automation devices such as garage door openers, lights, motorized gates, lifts, or other devices.

  • product_icon
  • product_icon
  • product_icon
  • product_icon
  • Five programmable relay output modes:
    • 4-Second momentary
    • 1-Second momentary
    • Toggle (ON/OFF)
    • Validity
    • Latch
  • 11~24 VAC/VDC Operation
  • Range: Up to 500ft (150m)*
  • Controls garage doors, gates, house lights, alarm panels or other devices via remote
  • LED indicates RF reception, learn mode entered, transmitter learned, memory cleared, and relay output mode
  • Pushbutton programming, no need to cut jumpers
  • Up to 15 transmitter button codes can be learned

*Operating range will vary greatly depending on the installation and operating environment.

Type WIRELESS – Single-Channel RF Receiver
Operating voltage 11~24 VAC/VDC
Range Up to 500′ (150m) with SECO-LARM transmitter. Range will vary.
Relay Rating Form C dry relay contact (NO/NC/COM); max 10 Amp at 24VDC per channel
Current Draw [email protected] (standby), 30mA/channel @12VDC (activated)
Extended Range Antenna Compatible Yes (SK-91ERSD)
Connectors 5 Quick-connect screw terminals (+, -, with NO/NC/COM)
Dimensions 3-1/8″ x 2-9/16″ x 1″ (80 x 65 x 25 mm)

Product Information Sheet (PI)

Manual

No upsell products found

Scroll to Top