Follow us on:           


Reflective Photoelectric Beam Sensor, ETL UL325 Compliant, 50ft

Model Number: E-931-S50RRGQ
  • For outdoor gates, garage doors, etc.
  • Weatherproof (IP55) construction for indoor/outdoor use
  • Anti-condensation housing
  • Dual-color LED alignment system
  • Form C relay: 500mA@30VAC/VDC
  • Tamper switch: N.C. 500mA@30VAC/VDC
  • 31/4” (82mm) Round reflector with hood included
  • Compact size
  • Monitored output: N.C., 10kΩ Resistor
 Typical Applications
  • For garage or overhead doors, outdoor gates
  • Industrial automation: detect objects on manufacturing line
Type Reflective photoelectric beam sensor
Current Draw Standby - 55mA@12VDC, Active - 40mA@12VDC
Sensing Range Up to 50' (15m)
Operating Voltage 12-30V DC/AC 60Hz, 100mA
Reaction time 10ms
Light Source IR LED
LEDs - Red Solid, No beam signal, triggered
LEDs - Green Solid, Good beam signal, properly aligned
LEDs Alternating Flash - Poor beam signal
Alarm Output SPDT relay output (NO/NC/COM)
Switching Capacity 500mA@30VAC/VDC
Tamper Switch 500mA@30VAC/VDC
Operating Temperature -13º~140º F (-25º~60º C)
Enclosure Weatherproof IP55

Sensor does not detect the object. 
  • Change the angle of the sensor or readjust the sensitivity setting

The beam sensor LED will not turn green
  • Clean the sensor and reflector with a damp (not wet) cloth
  • Apply a coating of RainX™ to the reflector and the face of the sensor to help keep the units clear of moisture.
  • Adjust the reflector and/or sensor for proper alignment

Beam sensor LED lights when object is detected, but there is no output.

  • Check wiring between the sensor and local alarm device.​