Language

4-in-1 HD TVI, CVI, AHD, Analog Rollerball Cameras - 2.8mm, White

Model Number: EV-Y2201-A2WQ
  • 1080p Resolution
  • 2.8mm ICR for a wide viewing angle
  • 3D-NR (3D Digital Noise Reduction)
  • DWDR (Digital Wide Dynamic Range)
  • 24 IR LEDs for low-light situations
  • Joystick OS​D control for easy camera programming
  • Heavy-duty vandal-resistant design
  • Weatherproof (IP65) construction
Housing Color White
Type Fixed Rollerball Camera
CMOS 1/2.9" 2MP Sony CMOS
Formats TVI / CVI / AHD / Analog (TVI Default)
Resolution (HD) 1920x1080
Viewing Angle 90°
TV Lines (Analog) 1200TVL
3D-NR Yes
2D-NR Yes
DWDR Yes
Cable OSD Control Yes
On Screen Display (OSD) Yes
Megapixels 2MP
Minimum Illumination - IR On 0Lux
Minimum Illumination- LEDs off Color: 0.1Lux/F1.4, B/W: 0.01Lux/F1.4
IR Range Up to 50ft (15m)
Video Output 1.0Vp-p complex video output
FPS 30FPS
Lens 2.8mm ICR
F Stop F1.4
No. of IR LEDs 24
S/N Ratio 50dB
DSS (Digital Slow Shutter) Yes
Shutter Control Yes
Operating Voltage 12VDC
Current Draw ON: 150mA, OFF: 80mA
Gain Control Yes
White Balance Auto, Day & Night
IP Rating IP65
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 3-11/16"x2-15/16" (93x75 mm)
Weight 13.1-oz (370g)
The screen is black
  • Check that the camera is powered up
  • Check that the power supply’s polarity is correct
  • Check that the monitor is powered up
  • Check that the video cable connecting the camera to the monitor is connected properly

The image is foggy or washed out at night
  • Check that there are no objects very close to the camera
  • Check that there are no highly reflective objects in the scene

The screen image is dim
  • Clean the lens using a soft, clean cloth
  • Check that the light source is adequate

The screen image has poor contrast
  • Adjust the monitor’s contrast knob
  • Change the position of the camera

The screen image flickers
  • Change the position of the camera, check cables and format setting

The screen image is distorted
  • Change the position of the camera, check cables and format setting

The camera case is hot
  • Check that the correct power supply is in use

IR LEDs do not turn on
  • Check that the correct power supply is in use