Follow us on:           


Plug-and-Play Backup Power, In-line Backup Power (Discontinued)

Model Number: SB-L10V1-20Q

Discontinued Product. Replaced by SB-P1012-26Q
Plug-and-Play Backup Power units provide backup power to power devices during temporary power outages. Installs between the original power adapter and the powered device and auto-selects 5, 7.5, 9, or 12VDC.

  • Real-time backup power with no break when input power is lost
  • DC UPS Auto-start
  • Batteries provided by GE™ (2600mAh user-replaceable Lithium Ion - SB-P1012-26Q /2000mAh lithium polymer - SB-L10V1-20Q)
  • Over-discharge, overcharge, overload, short-circuit, and surge protection on input and output
  • LED indicators for power and backup operation
  • Auto-recognizes voltage (5/7.5/9/12VDC) input and sets corresponding output
  • Additional indicator LEDs for output voltage and an audible/visible (LED) alarm warning of an overload, voltage issue, or low battery
Type In-line UPS
Input 5/7.5/9/12VDC±10%
Input Protection Overload and short-circuit fuse
Input Jack Type 5.5 x 2.1 mm DC Jack
Output Auto-configure 5/7.5/9/12VDC±5%
Output Power Rating 10W
Output Protection Over-discharge, overload, short-circuit protection
Battery GE™ Lithium Polymer 3.7VDC/2000mAh
Battery Protection Overcharge, over-discharge, overload, short-circuit
Backup Time Half Load- 60 min, Full Load- 25 min
LED Indicators Voltage, power, alarm, backup
Output Cord 12" (30.5cm)
Output Plug 5.5x2.1mm DC plug
Operating Temperature 32~104°F (0~40°C)
Operating Humidity 0~95% non-condensing
Dimensions 3-3/8" x 2-1/4" x 1-21/32" (85 x 57 x 42 mm)
Weight 4.3-oz (121g)