- Extends the range of PoE devices an additional 328ft (100m) with Cat5e cables or higher
- Maximum extended range of up to 984ft (300m) using two extenders
- Connects 10/100/1000BASE-T PoE devices including IP cameras, IP access control, VOIP, IP speakers/intercoms, etc.
- Supports up to gigabit transmission rates
- Passive operation – no external power required and easy plug-and-play installation
- Automatically detects PoE equipment and protects from damage due to faulty installation
- Surge protection for both data and power ports
- IP66 Weatherproof with weather-resistant UTP cable
| Connections | PoE In: 1x Weather-resistant RJ45 PoE Out: 1x Weather-resistant RJ45 |
| Transmission range – 656ft (200m) | Power Input: 15W, Power Output: 11.1W Power Input: 30W, Power Output: 19W |
| Transmission range – 948ft (300m) | Power Input: 15W, Power Output: 6.8W Power Input: 30W, Power Output: 15W |
| Data link | Both pin 1/2, 3/6 and 4/5, 7/8 |
| Power link | Pin 1/2(+), 3/6(–) up to 25W |
| Network cables | Weather-resistant Cat5e or higher |
| Ethernet speed | 10/100/1000 Mbps half/full duplex |
| PoE standard | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt (4 pairs, 90W) |
| IP Rating | IP66 (with weather-resistant UTP cable) |
| Operating humidity | 90% (maximum, non-condensing) |
| Operating temperature | -13°~101° F (-25°~55° C) |
| Dimensions (including endcaps) | 7-1/4″x1-3/4″x1-3/4″(185x45x45 mm) |
| Weight | 8-oz (227g) |
FAQs
- Ensure that all devices are turned on
- Ensure that the PoE device is functioning by plugging it directly into the PoE switch, computer, etc.
- Double-check that the cables were connected properly
- Run a continuity test on all wires in the cable
- Equipment at both ends must be at the same link speed, 10BASE-T with 10BASE-T, 100BASE-T with 100BASE-T, etc.
- Replace with a higher-grade cable for better performance
- Ensure that cable lengths are within the allowable range and consistent with the remote PoE device power consumption and reduce cable length as needed
- No more than 2 PoE extenders may be used
- Check that power consumption is within the specifications
