MVE-AH1E1-42NQ

4K HDMI Extender over Single Cat5e/6

The ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 4K can be transmitted up to 197ft (60m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

  • product_icon
  • product_icon
  • product_icon
  • product_icon
  • Extends HDMI over a single Cat5e/6 cable
  • Supports resolutions from 480i to 4K with zero signal loss
  • Transmits [email protected] up to 197′ (60m) or [email protected] up to 230′ (70m) over Cat6 cable
  • Plug and play operation
  • Active operation ensures signal strength
  • IR for remote control extension
  • One (1) 12VDC power supply included – set can be powered at either end
Maximum Single Link Range [email protected]
Deep Color 8bit
Video Format Supported High-speed HDMI, HDCP 2.2
Audio Formats Supported LPCM 2/51/7.CH, Dolby Digital, DTS 5.1, Dolby Digital+, DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Output Video [email protected]
Resolutions Supported [email protected]/[email protected]/1080p/1080i/720p/576p/576i/480p/480i
Range 1080p: Cat6: Up to 230′ (70m); Cat5e: Up to 164′ (50m)
Range – 4K [email protected]: Up to 197′ (60m); [email protected]: Up to 164′ (50m)
Video Amplifier Bandwidth 18Gbps
Video Input Connector HDMI Type A 19-pin female
Video Output Connector HDMI Type A 19-pin female
IR Frequency 30 ~ 60 kHz
Power Supply [email protected] (1 Adapter) (2.1mm plug)
ESD Protection (Human Body Model) ±8kV (air-gap discharge), ±4kV (contact discharge)
Cat5e/6 Wiring Standard T-568B
Operating Temperature 32°~104° F (0°~40° C)
Operating Humidity 20~90% RH (no condensation)
Dimensions 3-7/16″x23 / 8″x11/16″ (88x61x17 mm)
Weight 5.08-oz (144g) (each)

Product Information Sheet (PI)

Download File

MANUAL

Download File
HDMI device does not function correctly
  • Use T-568B wiring standard
  • Make sure the extender is powered
  • Make sure the source and the display are powered
  • Test the Cat5e/6 cable between the receiver and transmitter and make sure it is functional
  • Make sure that there are no problems with the HDMI source, HDMI cables, or HDMI display by plugging the source directly into the display using an HDMI cable
Screen flickering or brief image loss
  • Use a higher grade of twisted pair category cable (Cat6 is recommended)
  • Switch the source device to a lower HDMI output (i.e., [email protected] to 1080p)
  • Restart the handshake process by powering everything down then powering up and connecting each device in succession starting with the HDMI source

No upsell products found

Copyright ©2023 by SECO‑LARM U.S.A., Inc. All rights reserved. Supplier of Security Systems and Accessories Worldwide. The SECO‑LARM policy is one of continual development. For that reason, SECO‑LARM reserves the right to change specifications without notice. SECO‑LARM is not responsible for misprints or typographical errors.

Scroll to Top