Bronze-Colored Aluminum Low-Cut Strike Plate

  • product_icon
  • product_icon
  • Optional Bronze-Colored Aluminum Low-Cut Strike Plate for SD-991A-D1Q
  • Size: 23/4“x111/16“x1”  (70x43x25mm)
Dimensions 2-3/4″x1-11/16″x1″ (70x43x25mm)
Construction Aluminium

Product Information Sheet (PI)


Electric strike does not activate
  • Unmount the strike and check that the two wires are connected properly
  • Ensure the wires are connected to a 12VDC source
  • Use a multimeter to test that the strike is receiving the proper voltage and amperage. If it is not, it may be necessary to use heavier gauge wires, or increase the output of the power supply
  • Make sure the activation device (keypad, pushbutton switch, etc.) is working properly
Door does not open when the electric strike
is activated
  • Check that the door latch is operating properly and replace if necessary
  • The position of the electric strike may need to be adjusted by moving it or adding washers or shims
Scroll to Top