E-942FC-600

Cerradura electromagnética de 600 lb, montaje frontal, UL Listed

  • product_icon
  • product_icon
  • product_icon
  • 271 kg (600 lb) Fuerza de sujeción
  • Sin magnetismo residual
  • MOV Protección contra sobretensiones
  • Montaje frontal
  • Para puertas correderas o batientes
  • Puede montarse horizontal o verticalmente
  • Para aplicaciones interiores y exteriores
  • Diseño sellado de fábrica que no requiere mantenimiento
  • Impermeable (IP67) y resistente al vandalismo
  • Conexión de conducto de doble rosca
  • Atractiva carcasa de acero inoxidable
  • Cable de conexión de 91 cm (3 pies)
  • Hardware de montaje completo para instalaciones típicas
  • Soportes adicionales disponibles para facilitar el montaje o en situaciones atípicas
  • 12/24VDC seleccionable
  • Múltiples listados UL
        • Prueba de incendio de presión positiva UL10C – EE.UU.
        • Ensayo de resistencia al fuego de conjuntos de puertas UL10B – EE.UU.
        • ULC-S104 Ensayo de resistencia al fuego de conjuntos de puertas – Canadá
  • Garantía limitada de por vida*.

*La garantía sólo se aplica en EE.UU. y Canadá. Para más información, póngase en contacto con SECO-LARM.

Holding Force 600-lb (272kg)
Operating Voltage 12VDC or 24VDC ±10%
Current Draw 500mA@12VDC, 250mA@24VDC
IP Rating Weatherproof IP67
Operating Temperature 14º~131º F (-10º~55º C)
Electromagnet Dimensions 8″ x 1-11/16″ x 1-9/16″ (203x43x40 mm)
Armature Dimensions 7-1/4″ x 1-5/8″ x 9/16″ (185x41x14 mm)
Weight 6-lb (2.7kg)

Product Information Sheet (PI)

Mounting Template

The gate does not lock
  • Check that the wires are secure
  • Check that the power supply is connected and operational
  • Check that the unit is wired correctly
The gate locks, but can easily be forced open
  • Check that the electromagnet and armature plate are properly aligned
  • Check that the contact surfaces of the electromagnet and armature plate are clean and free from rust
  • Check the power leads with a meter, and make sure the correct voltage is present
Delay in gate releasing
  • The electromagnet is fitted with a metal oxide varistor to prevent interference, so do not install a second diode.
Scroll al inicio