CS-PD115-PAQ

Infrared Proximity Sensor – 19mm, Polycarbonate

The ENFORCER IR Proximity Sensor is a compact sensor that can be programmed to trigger an alarm when an object (such as a valuable possession) is removed from the sensing area or unlock an electronic door lock when an object (such as a hand) is passed in front of the sensor. This flexibility makes the sensor ideal for both anti-theft and access control applications.

  • product_icon
  • product_icon

  • No-touch operation reduces the risk of spread of germs, viruses, etc., through cross-contamination
  • Adjustable sensor range up to 6″ (15cm) 1A relay, adjustable trigger duration 0.5~20 seconds or toggle
  • Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated
  • Weatherproof (IP65*) for outdoor use
  • OEM / Private label available

​* Weatherproof when properly installed (see manual)

​Click here for a full line of Touchless Sensors

Sensing Range 2″~6″ (5~15 cm)
LEDs Red- Standby, Green- Triggered
Alarm Output 1A@30VDC
Output Time 1~20 s or Toggle
Operating Voltage 12~24 VDC
Current Draw 30mA@12VDC
IP Rating Weatherproof IP65
Operating Life 100,000 Hours or 1,000,000 uses
Operating Temperature -4°~131° F (-20°~55° C)
Weight 0.35-oz (10g)
Dimensions ø3/4″ (ø19mm)

Product Information Sheet (PI)

Manual

Diagram

FAQs

  1. Check that there are no objects in front of the sensor.
  2. Adjust the sensor’s range to be shorter (see IR Range and Trigger Time Settings on page 3 in the manual).
  3. Check that the power supply’s voltage is 12~24 VDC.
  4. Adjust the trigger time setting – a long delay or enabling toggle mode could affect the sensor’s operation.
  1. Adjust the sensor’s range to be longer (see IR Range and Trigger Time Settings on page 3 in the manual).
  2. Check that the power supply’s voltage is 12~24 VDC.

No upsell products found

Scroll to Top