- ICR Module
- D-WDR (Digital Wide Dynamic Range)
- Joystick OSD control
- Heavy-duty vandal-resistant design
- Rugged, weatherproof (IP66) construction
- Split-glass design eliminates IR reflection
- Cables concealed in bracket to prevent tampering
- Junction box is not included with the product
Housing color | White |
Formats | TVI (Default) / CVI / AHD / Analog |
CMOS | 1/2.7″ 5MP CMOS |
Resolution (HD) | 2592×1944 |
3DNR | No |
2DNR | Yes |
D-WDR | Yes |
OSD (On-Screen Display) | Yes |
Cable OSD control | Yes |
Megapixels | 5MP |
Lens | 2.8~12mm ICR |
Viewing Angle | 38°~138° |
# of IR LEDs | 24 (SMT) |
IR Range | Up to 98ft (30m) |
FPS | 20FPS |
F Stop | 2.0 |
Minimum illumination – IR On | 0Lux |
Minimum illumination – IR Off | 0.05Lux |
S/N Ratio | 35dB |
Shutter control | Auto |
Gain control | Auto |
Operating voltage | 12VDC |
Current Draw – IR On | 320mA |
Current Draw – IR Off | 80mA |
IP Rating | Weatherproof IP66 |
Operating temperature | -22°~131° F (-30°~55° C) |
Dimensions | ø5-13/16″x4-5/8″ (ø147×117 mm) |
Weight | 2-lb 6-oz (1067g) |
Product Information sheet (PI)
Manual
On-Screen Display Manual
Advertisement
FAQs
Check that the correct power supply is in use.
Change the position of the camera.
Adjust the monitor’s contrast knob. Change the position of the camera.
Clean the lens using a soft, clean cloth. Check that the light source is adequate.
Change the position of the camera.
- Check that the camera is powered up.
- Check that the power supply’s polarity is correct. Check that the monitor is powered up.
- Check that the video cable connecting the camera to the monitor is connected properly.