EV-Y5105-N2SQ

4-in-1 HD TVI, CVI, AHD, Analog Wall-Plate Camera

ENFORCER Vandal-Resistant Wall-Plate Cameras can be installed inconspicuously in many different locations: doors, walls, car bumpers, gates, entryways, machinery, and many other places.

  • product_icon
  • product_icon
  • product_icon
  • HD TVI, CVI, AHD, Analog
  • 2.9mm Lens (155° viewing angle)
  • 1/2.8″ 2MP Sony STARVIS CMOS
  • D-WDR (Digital Wide Dynamic Range)
  • 2DNR (2D Digital Noise Reduction)
  • Vandal-resistant
  • Waterproof (IP67)
  • Fits in a standard single-gang back box (not included)
  • Adjustable mounting angle
  • Each kit includes:
    • Camera
    • Single-gang plate
    • Slimline plate
    • Angled mounting rings

*European plate also available. Contact SECO-LARM for more details.

Type Wall-plate camera
Image sensor 1/2.8″ 2MP Sony STARVIS CMOS
Video Output Format HD TVI, CVI, AHD, Analog
Resolution 1080p
Viewing Angle 155°
Effective Pixels 1920×1080
2D-NR Yes
DWDR Yes
Minimum Illumination Color: 0.01Lux, BW: 0.001Lux
Scanning System 2:1 Interface
Sync Internal
FPS 30FPS
Lens 2.9mm
F Stop 2.0
S/N Ratio 50dB
Operating Voltage 12VDC
Current Draw 130mA±15%
Gamma Correction 0.45
Gain Control Auto
IP Rating Waterproof  IP67
Operating Temperature 14°~122° F (-10°~50° C)
Dimensions Camera – 1-7/16″xø1-1/8″(36xø28 mm), Single-gang plate – 23/4″x41/2″ (70×114 mm), Slimline plate – 1-1/2″x4-1/2″ (38×114 mm)
Weight 2.8-oz (80g)

Product Information Sheet (PI)

Manual

On-Screen Display Manual

Advertisement

The screen is black
  • Check that the camera is powered up.
  • Check that the power supply’s polarity is correct.
  • Check that the monitor is powered up.
  • Check that the video cable connecting the camera to the monitor is connected properly.
The screen image is dim
  • Clean the lens using a soft, clean cloth.
  • Check that the light source is adequate.
The screen has poor contrast
  • Adjust the monitor’s contrast knob
  • Change the position of the camera
The screen image flickers
  • Change the position of the camera, check cables and format setting
The screen image is distorted.
  • Change the position of the camera, check cables and format setting
The camera case is hot
  • Check that the correct power supply is in use
The image is foggy or washed out at night
  • Check that there are no objects very close to the camera
  • Check that there are no highly reflective objects in the scene
IR LEDS do not turn on
  • Check that the correct power supply is in use

 

 

No upsell products found

Scroll to Top