Outdoor Wave-to-Open Sensor with Manual Override – Slimline – English

The ENFORCER Outdoor Wave-to-Open Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.

  • product_icon
  • product_icon
  • product_icon

  • ETL, Conforms to UL Std. 294
  • Adjustable sensor range up to 7″ (18cm)
  • Stainless steel plate
  • Weatherproof (IP65) for outdoor use*
  • 1.2A relay, adjustable trigger duration 0.8~30 seconds or toggle
  • LED illuminated sensor area for easy identification
  • Selectable LED colors (turns from red to green or green to red) to show sensor activated
Operating temperature 12~24 VDC
Current draw (max. ±10%) Standby red (12/24 VDC): 13mA / 15mA
Triggered green (12/24 VDC): 21mA / 25mA
Standby green (12/24 VDC): 12mA / 14mA
Triggered red (12/24 VDC):  23mA / 28mA
Relay type SPDT dry contact, 1.2A@24VDC
Response time 10ms
LED Standby: Red*
Triggered: Green*
Ouput duration 0.8~30 s, toggle
Range 2″~7″ (5~18 cm)
Destructive attack level Level I
Line security Level I
Endurance level Level IV
Standby power Level I
IP Rating Weatherproof, IP65
Operating Temperature -4°~131° F (-20°~55° C)
Dimensions 1-1/2″ x4-1/2″(39 x115 mm)
Weight 2.7-oz (77g)

*Color function reversible †When properly installed

Product Information Sheet (PI)





  1. Ensure that no strong direct or reflected light source is reaching the sensor.
  2. Ensure that sensor is sheltered from direct sunlight.
Scroll to Top